Nyalic® Clear Surface Corrosion Protectant for Telehandlers
ECONOMIC VALUE ADDED BY NYALIC COATING
+ Extends Equipment Life
+ Increases Equipment Residual / Trade-in Value
+ Reduces Maintenance Downtime/Productivity Loss
+ Reduces Maintenance Expenditures
+ Reduces Need for Backup Equipment
+ Preserves Appearance of Assets
Spreaders are generally quite large with a wide variety of optional bin configurations and attachments. So if you would like to order the necessary Nyalic® rust inhibitor products for your particular equipment, please contact us at 706-253-1920 or email us at email@example.com for assistance.
TO ESTIMATE THE PRODUCTS REQUIRED - you can use the following guidelines:
- One quart of Nyalic's corrosion protectant will cover up to 300 square feet (one coat). Divide the square footage of your project by 300 to determine the number of Nyalic quarts to buy.
- Simple Prep™(degreaser) is needed to clean the surface prior to coating. 0.5 (1/2) quart of Simple Prep is needed for each quarts of Nyalic purchased. Multiply the Nyalic quarts by 0.5 to determine the number of Simple Prep quarts to buy.
- Right Rinse™ (neutralizer) is needed to final rinse the surface before coating. 0.25 (1/4) quart of Right Rinse is needed for each quart of Nyalic. Multiply the Nyalic quarts by 0.25 to determine the number of Right Rinse quarts to buy.
- Nyalic 12oz Aerosol cans are used to coat areas that are difficult to reach as well as to perform touch-up of deep scrapes and gouges. 0.333 (1/3) 12oz aerosol is generally needed for every each quart of Nyalic. Multiply the Nyalic quarts by 0.333 to determine the number of 12oz aerosol cans to buy.
Nyalic protection for Telehandlers operating in Corrosive Chemicals, up to 1,200 sq coverage. Includes: 4 qts Nyalic, 3 Nyalic aerosols, 2 qt Simple Prep (degreaser), 1qt Right Rinse cleaner, 3 scrub pads, and hand brush. AG-CNSTR-TH4
Nyalic's long term corrosion inhibitor products provide up to 1,800 sq coverage and are meant for telescopic handlers operating in corrosive chemicals. Includes: 6 qts Nyalic, 4 Nyalic aerosols, 3 qts Simple Prep (degreaser), 2 qts Right Rinse cleaner, 3 scrub pads, and hand brush. AG-CNSTR-TH6
Nyalic protection for Telehandlers operating in Corrosive Chemicals, up to 2,400 sq coverage. Includes: 8 qts Nyalic, 5 Nyalic aerosols, 4 qts Simple Prep (degreaser), 2 qts Right Rinse cleaner, 3 scrub pads, and hand brush. AG-CNSTR-TH8
Nyalic Quart – 32 oz Covers up to 300 sf
Nyalic Wrap - 5 pack (5 rolls)
Nyalic 12-oz CA Aerosol can - covers up to 95sf
2 Nyalic 12-oz Aerosol cans - covers up to 190sf
3 Nyalic 12-oz Aerosol cans - covers up to 285sf
Simple Prep™ Quart – 32 oz Environmentally friendly degreasing cleaner
Right Rinse™ Quart – 32 oz – Concentrated Cleaner
Temporary Transport Protective Coatings Remover - Quart - 32oz Can
Tuff Prep™ (gel) - 3.5 lb Jar - Mild abrasive gel to remove oxidation