Spreaders

Nyalic_® Clear Coat Protectant for Spreaders

Spreaders are generally quite large with a wide variety of optional bin configurations and attachments. So if you would like to order the necessary Nyalic® rust prevention products for your particular equipment, please contact us at 706-253-1920 or email us at [email protected] for assistance.

TO ESTIMATE THE PRODUCTS REQUIRED - you can use the following guidelines:

• One quart of Nyalic's anti-corrosion coating will cover up to 300 square feet (one coat). Divide the square footage of your project by 300 to determine the number of Nyalic quarts to buy.
   
• Simple Prep™(degreaser) is needed to clean the surface prior to coating. 0.5 (1/2) quart of Simple Prep is needed for each quarts of Nyalic purchased. Multiply the Nyalic quarts by 0.5 to determine the number of Simple Prep quarts to buy.
   
• Right Rinse™ (neutralizer) is needed to final rinse the surface before coating. 0.25 (1/4) quart of Right Rinse is needed for each quart of Nyalic. Multiply the Nyalic quarts by 0.25 to determine the number of Right Rinse quarts to buy.
   
• Nyalic 12oz Aerosol cans are used to coat areas that are difficult to reach as well as to perform touch-up of deep scrapes and gouges. 0.333 (1/3) 12oz aerosol is generally needed for every each quart of Nyalic. Multiply the Nyalic quarts by 0.333 to determine the number of 12oz aerosol cans to buy.