Marine

MARINE KIT - Clearcoat Restores Color + Corrosion Protection (covers up to 600 sf)

Write a Review

Your Price: $299.99

Nyalic Marine Rust Inhibitor Kit is designed to restore used marine paint & provide surface protection against harsh weather. Includes: 2 qts Nyalic, 1 Nyalic aerosol, 1 qt Simple Prep™ degreaser, 2 qts Right Rinse™ cleanser, 1 Tuff Prep™ 3.5 pound jar, 3 scrub pads, and hand brush. MRN-KT2

Questions about this item? Ask here.

Part Number: MRN-KT2

Availability: In Stock.

Quantity

Description
Questions and Answers

Nyalic Marine - Color Restoration & Basic Surface Protection, when applied and maintained as directed, is designed for use on used boats to restore the paint gloss and color and provide on-going surface protection to inhibit bare metal oxidation, paint oxidation, fiberglass oxidation and stains caused by harsh weather.

Boat Corrosion Protection Kit Covers up to 600 ft² (1 coat) sprayed. Apply to bare metal surfaces, painted surfaces, fiberglass, electrical and mechanical connections, radiators, engine compartments, electrical components, stainless steel & aluminum components, davits, cleats, masts, tuna towers and wakeboard towers.

Marine Rust Inhibitor Kit Contains: 2 qts Nyalic, 1 Nyalic aerosol, 1 qt Simple Prep™ degreaser, 2 qts Right Rinse™ cleanser, 1 Tuff Prep™ 3.5 pound jar, 3 scrub pads, hand brush, and instructions.

Q: Will this or any other clear coat that you produce restore shine and protect my bass boat ? The gel coat is gone no polishing will help. Thank you.

Asked by: Greg Thomas - 7/31/2016

A: Yes, Nyalic will restore the gloss to faded surfaces.

To test to see how far gone your gel coat is, wet the boat and see if it looks glossy. If it does then the Nyalic will help. If not, you need further remediation.

Was this answer helpful? 1 of 3 Customer(s) found this Answer helpful.

Answer provided by: Nyalic Advisor (3/31/2017)

Q: I have a 20’ bass boat with parts of the clear gel coat faded and I was curious if this would be a good product to fix the spots where it is faded?

Asked by: Jalen Dickinson - 4/6/2019

A: Nyalic does restore the look to faded gel coat. Our process is to use our Tuff Prep to scrub the entire surface, rinse, wash with Right Rinse, rinse and allow to dry. The finished look depends on the amount of pigment left in the gel coat.

Was this answer helpful? 1 of 5 Customer(s) found this Answer helpful.

Answer provided by: Skip Hawkins (4/7/2019)

Q: I have a 18' aluminum boat with a 85" beam. I am double checking to make sure the MRN-KT2 package would be appropriate for my boat. The boat is brand new.

Asked by: Joey - 11/3/2021

A: Yes, our MRN-KT2 kit contains all of the product that you need to clean and coat an 18" aluminum boat. You will not need the Tuff Prep for a new boat surface.

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Skip Hawkins (11/4/2021)

Q: I purchased the MRN-KT2 and I am using this on an RV. Is there a difference in the RV kit and the Marine kit or are they the same?

Asked by: Greg s - 6/9/2022

A: Yes, the contents of the MRN-KT2 kit and the RVT-KT2 kit are the same.

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Skip Hawkins (6/11/2022)

Q: Good Day from the M/V Celebrity Summit, We are planning to use your Marine Kit MRN-KT2 on our lifeboats and tender boats, but I have an inquiry in regards if we can use this kit for the lifeboat's hull as well (the submerged part of the lifeboat). Or this coating should be used only on the top part of the boat? Our lifeboats are Schat Harding fiberglass lifeboats and tender boats. Thank you in advance for your time in reading this e-mail. I am looking forward to your prompt reply. Respectfully, Nicoleta Pascal Chief Officer/ Hull and Deck Maintenance

Asked by: Nicoleta Pascal - 8/18/2018

No Answers have been submitted yet.

Questions about this item? Ask here.

MARINE KIT - Clearcoat Restores Color + Corrosion Protection (covers up to 600 sf)

MARINE KIT - Clearcoat Restores Color + Corrosion Protection (covers up to 600 sf)

Q: Will this or any other clear coat that you produce restore shine and protect my bass boat ? The gel coat is gone no polishing will help. Thank you.

Q: I have a 20’ bass boat with parts of the clear gel coat faded and I was curious if this would be a good product to fix the spots where it is faded?

Q: I have a 18' aluminum boat with a 85" beam. I am double checking to make sure the MRN-KT2 package would be appropriate for my boat. The boat is brand new.

Q: I purchased the MRN-KT2 and I am using this on an RV. Is there a difference in the RV kit and the Marine kit or are they the same?

Recently Viewed Items