Nyalic® Aluminum Boat Corrosion Prevention
EXTREME ENVIRONMENTS - Nyalic Proven ProtectionHeat, Cold, UV Damage, Ocean Salt Air, Tropical Humidity
Nyalic lasts for years and protects bare metals, painted surfaces, plastics and fiberglass from saltwater, sea spray and harsh environmental elements that cause corrosion, oxidation, tea staining, pitting and black streaks.
Highly UV resistant, Nyalic, when properly applied, will not chip crack, fade, flake, peel or yellow.
PENETRATING MOISTURE DAMAGE - Nyalic Proven ProtectionSea Water, Rain, Snow, Ice, High Humidity
Nyalic can also be applied to protect electrical panels and connections to seal out moisture and contaminants that can cause rapid corrosion. Nyalic protects against oxidation, chalking, pitting, and black streaks.
Nyalic helps to preserve the finish and eliminates the need to wax or polish. Cleanup of a Nyalic coated surface is simple, fast and easy. Nyalic applied to surfaces used in saltwater may still have marine growth try to attach to the surface, but the Nyalic closes the pores of even highly polished aluminum and makes cleanup and removal simple with fresh water, Right Rinse and a soft bristle brush.
AGGRESSIVE CORROSION & OXIDATION - Nyalic Proven ProtectionBare Metal (aluminum, copper, steel, bronze, stainless steel) & Paint
Nyalic is used to restore the gloss and appearance of faded, oxidized fiberglass. Gloss meter readings taken before and after a Nyalic application show gloss improvements by as much as 400%. The cost of using Nyalic to restore the look of an oxidized, faded painted or fiberglass surface can be less than $300 depending on the size of the boat.
TO ESTIMATE THE PRODUCTS REQUIRED - you can use the following guidelines:
- One quart of Nyalic will cover up to 300 square feet (one coat). Divide the square footage of your project by 300 to determine the number of Nyalic quarts to buy.
- Simple Prep™ (degreaser) is needed to clean the surface prior to applying the aluminum boat protective coating. 0.5 (1/2) quart of Simple Prep is needed for each quarts of Nyalic purchased. Multiply the Nyalic quarts by 0.5 to determine the number of Simple Prep quarts to buy.
- Right Rinse™ (neutralizer) is needed to final rinse the surface before using the aluminum boat protective coating. 0.25 (1/4) quart of Right Rinse is needed for each quart of Nyalic. Multiply the Nyalic quarts by 0.25 to determine the number of Right Rinse quarts to buy.
- Nyalic 12oz Aerosol cans are used to coat areas that are difficult to reach as well as to perform touch-up of deep scrapes and gouges. 0.333 (1/3) 12oz aerosol is generally needed for every each quart of Nyalic. Multiply the Nyalic quarts by 0.333 to determine the number of 12oz aerosol cans to buy.
FOR SMALL PROJECTS (up to 600 sq feet)
Consider ordering our Marine Kit MRN KT2.... it includes everything you need for profession result. Order Below!
Nyalic Marine Rust Inhibitor Kit is designed to restore used marine paint & provide surface protection against harsh weather. Includes: 2 qts Nyalic, 1 Nyalic aerosol, 1 qt Simple Prep™ degreaser, 2 qts Right Rinse™ cleanser, 1 Tuff Prep™ 3.5 pound jar, 3 scrub pads, and hand brush. MRN-KT2
Nyalic Quart – 32 oz Covers up to 300 sf
Nyalic Wrap - 5 pack (5 rolls)
Nyalic 12-oz CA Aerosol can - covers up to 95sf
2 Nyalic 12-oz Aerosol cans - covers up to 190sf
3 Nyalic 12-oz Aerosol cans - covers up to 285sf
Simple Prep™ Quart – 32 oz Environmentally friendly degreasing cleaner
Right Rinse™ Quart – 32 oz – Concentrated Cleaner
Temporary Transport Protective Coatings Remover - Quart - 32oz Can
Tuff Prep™ (gel) - 3.5 lb Jar - Mild abrasive gel to remove oxidation