Pleasure Boats
Nyalic® Corrosion Protectant for Boats
Why Use Nyalic?
- Provides years of protection
- No waxing / No polishing / No buffing
- A Nyalic-coated surface is easy to clean, easy to maintain and easy to repair
- Protects sensitive electronic gear from corrosion
- Prevents staining
- Used as a topcoat to prolong the life of marine enamels and urethanes
- Your boat will look better than your buddy's boat!
Nyalic lasts for years and protects bare metals, painted surfaces, plastics and fiberglass from saltwater, sea spray and harsh environmental elements that cause corrosion, oxidation, tea staining, pitting and black streaks. Nyalic can also be applied to protect electrical panels and connections to seal out moisture and contaminants that can cause rapid corrosion. Highly UV resistant, Nyalic, when properly applied, will not chip crack, fade, flake, peel or yellow. Nyalic protects against oxidation, chalking, pitting, and black streaks.
Nyalic helps to preserve the finish and eliminates the need to wax or polish. Cleanup of a Nyalic coated surface is simple, fast and easy. Nyalic applied to surfaces used in saltwater may still have marine growth try to attach to the surface, but the Nyalic closes the pores of even highly polished aluminum and makes cleanup and removal simple with fresh water, Right Rinse™ and a soft bristle brush.
Nyalic is used to restore the gloss and appearance of faded, oxidized fiberglass. Gloss meter readings taken before and after a Nyalic application show gloss improvements by as much as 400%. The cost of using Nyalic to restore the look of an oxidized, faded painted or fiberglass surface can be less than $300 depending on the size of the boat.
Nyalic is used to coat bright work and railings and is used to topcoat varnished surfaces of teak to increase the life cycle of the varnish.
LEARN MORE
Nyalic helps to preserve the finish and eliminates the need to wax or polish. Cleanup of a Nyalic coated surface is simple, fast and easy. Nyalic applied to surfaces used in saltwater may still have marine growth try to attach to the surface, but the Nyalic closes the pores of even highly polished aluminum and makes cleanup and removal simple with fresh water, Right Rinse™ and a soft bristle brush.
Nyalic is used to restore the gloss and appearance of faded, oxidized fiberglass. Gloss meter readings taken before and after a Nyalic application show gloss improvements by as much as 400%. The cost of using Nyalic to restore the look of an oxidized, faded painted or fiberglass surface can be less than $300 depending on the size of the boat.
Nyalic is used to coat bright work and railings and is used to topcoat varnished surfaces of teak to increase the life cycle of the varnish.
LEARN MORE
KIT SUMMARY: MRN-KT1-NU
The Nyalic Marine Kit is designed to provide single coat, basic surface protection for new and used boats, trailers, PWC, towers and accessories. Nyalic can be used to restore chalky, fade, oxidized paint and fiberglass. Nyalic can be used on aluminum boats, pontoons, fiberglass boats, ski/wake/tuna towers, lifeboats, bright work, electrical components, outboard engines and lower units. Nyalic is used to varnished surfaces to extend the life of the varnish and reduce the constant stripping and re-varnishing of surfaces.
KIT PROVIDES: all of the material to coat a boat, tower or PWC that will
- clean and restore the gloss and appearance of faded, chalked painted surfaces
- clean and protect bare aluminum boats and pontoons
- clean and protect fiberglass surfaces
- clean and protect lifeboats and dinghys
- protect electrical panels and connections
- coat engine compartments
- coat outboard motors and lower units
- protect new or used boats used in either freshwater or saltwater
- maintain the appearance of bright work (stainless steel, brass, bronze, etc.)
- protect trailers
- restore and protect tuna/wakeboard/ski towers
- restore and protect sailboat masts
NOTE: Larger boats can be coated using multiple kits or additional individual product as required.
NOTE: Nyalic aerosol cans are available for field touch-up of damaged coated surfaces and for small projects.
Nyalic Marine Rust Inhibitor Kit is designed to restore used marine paint & provide surface protection against harsh weather. Includes: 2 qts Nyalic, 1 Nyalic aerosol, 1 qt Simple Prep™ degreaser, 2 qts Right Rinse™ cleanser, 1 Tuff Prep™ 3.5 pound jar, 3 scrub pads, and hand brush. MRN-KT2
$299.99