Have a Question? 770-690-1480

Fiberglass Boats

Nyalic® is used to restore the gloss and appearance of faded, oxidized fiberglass. Gloss meter readings taken before and after a Nyalic application show gloss improvements by as much as 400%. The cost of using Nyalic to restore the look of an oxidized, faded painted or fiberglass surface can be less than $300 depending on the size of the boat.


Why use Nyalic?

  • Harsh salt deposits and brackish water simply wash away with fresh water and Right Rinse cleaner
  • Fish blood and guts easily wash away at the end of a days fishing
  • Protects against staining
  • No waxing / No polishing / No buffing
  • Protects electrical and electronic gear
  • Coat stainless steel and brass fittings
  • Damaged areas are easy to repair with a quick cleanup and Nyalic application with our aerosol product


And don't forget that your trailer can be coated with Nyalic too.

Simple Prep works very well to remove black streaks on surfaces that are not coated with Nyalic.





NOTE: Nyalic aerosol cans are available for field touch-up of damaged coated surfaces and for small projects.


TO ESTIMATE THE SPECIFIC QUANTITIES NEEDED, use the following guide:


1. One quart of Nyalic will cover up to 300 square feet (one coat).  Divide the square footage of your project by 275 (to allow for loss) to determine the number of Nyalic quarts needed (round up to the next whole quart).


2. Simple Prep (degreaser) is needed to clean the surface prior to coating.  1/2 qt. of Simple Prep is needed for each 1 quarts of Nyalic purchased.  Multiply the number of Nyalic quarts needed by (1/2) .5 to determine how many quarts of Simple Prep to order.  For partial quarts calculated, round up to the next whole quart.

3. Right Rinse (neutralizer soap) is needed to final rinse the surface before coating.  1 quart of Right Rinse is needed for each 4 quarts of Nyalic.  Multiply the Nyalic quarts by (1/4) .25 to determine the number of Right Rinse quarts to order.  For partial quarts calculated, round up to the next whole quart.

4. Nyalic 12oz Aerosol cans are used to coat areas that are difficult to reach as well as to perform touch-up of deep scrapes and gouges for maintenance purposes.  One 12oz aerosol is generally needed for every 3 quarts of Nyalic.  Multiply the Nyalic quarts by (1/3) .333 to determine the number of aerosols to order.    

 


FOR SMALL PROJECTS (up to 600 sq feet)

Consider ordering our Marine Kit MRN KT2  for smaller projects.... it includes everything you need for profession result.  Order Below! 
Products (Total Items: 8)
Sort by:
MARINE KIT - Clearcoat Restores Color + Corrosion Protection (covers up to 600 sf)
Nyalic® Marine Kit is designed to restore used marine paint & provide surface protection against harsh weather. Includes: 2 qts Nyalic, 1 Nyalic aerosol, 1 qt Simple Prep™ degreaser, 2 qts Right Rinse™ cleanser, 1 Tuff Prep™ 3.5 pound jar, 3 scrub pads, and hand brush. MRN-KT2
$199.00
In Stock. Free Shipping.
Nyalic® Quart – 32 oz
Nyalic® Quart – 32 oz Covers up to 300 sf
$69.54
In Stock. Free Shipping.
Nyalic® 12-oz Aerosol can
Nyalic® 12-oz Aerosol can - covers up to 95sf
$24.60
In Stock. Free Shipping.
12oz Aerosol Can - 2PAK
2 Nyalic® 12-oz Aerosol cans - covers up to 190sf
$43.06
In Stock. Free Shipping.
12oz Aerosol Can - 3PAK
3 Nyalic® 12-oz Aerosol cans - covers up to 285sf
$52.54
In Stock. Free Shipping.
Simple Prep™ Quart – 32 oz
Simple Prep™ Quart – 32 oz Environmentally friendly degreasing cleaner
$10.15
In Stock.
Right Rinse™ Quart – 32 oz
Right Rinse™ Quart – 32 oz – Concentrated Cleaner
$10.80
In Stock.
Tuff Prep™ (gel) - 3.5 lb Jar
Tuff Prep™ (gel) - 3.5 lb Jar - Mild abrasive gel to remove oxidation
$22.95
In Stock.
Information
Browse By Category